Specifications - Panasonic DVCPRO50 AJ-D960EG Operating Instructions Manual

Specifications

GENERAL
Power supply: AC 220 – 240 V, 50 – 60 Hz
Power consumption: 280 W
Operating ambient temperature:
Operating ambient humidity:
Weight:
Dimensions (W H D):
Recording format:
Recording video signal:
Recording audio signal:
Recording tracks:
Tape speed:
Recording time:
Tape:
FF/REW time:
Digital slow:
Editing accuracy:
Tape timer accuracy:
Servo lock time:
VIDEO
Digital video
Sampling frequencies:
Quantizing:
Video compression method:
Video compression rate:
Error correction:
Video recording/playback bit rate:
Digital IN/Analogue Component OUT
Video bandwidth:
S/N ratio:
K factor:
Y/P , P delay:
B R
Video input connector
Analogue component input
(option):
Analogue composite input (option): BNC
Reference input:
Serial digital component input:
SDTI input (option):
5 C to 40 C
10% to 90% (no condensation)
20 kg
424 (max. 435.4) 175.2 415 mm
(Not including the support legs, connectors, and JOG dial)
DVCPRO50/DVCPRO format selectable
625i/525i selectable
DVCPRO50; 48 kHz 16-bit 4 channels
DVCPRO; 48 kHz 16-bit 2 channels
Digital video audio; helical track
The time code is recorded in the sub-code area.
Cue track; 1 track
Control track; 1 track
67.708 mm/sec (625i)
67.640 mm/sec (525i)
92 minutes (using the AJ-5P92LP)
33 minutes (using the AJ-5P33MP)
Metal tape
Less than 3 min (with AJ-5P92LP)
Less than 2 min (with AJ-5P33MP)
DVCPRO50/DVCPRO; –1 to +2 speed
DV/DVCAM; –1 to +1 speed
0 frames (using the time code)
1 frame (using the continuous CTL signal)
Less than 0.5 sec (colour framing/standby ON)
625i/525i; Y; 13.5 MHz, P /P
B
8 bits
DCT + adaptive sampling + variable-length encoding
DVCPRO50; 1/3.3
DVCPRO; 1/5
Reed-Solomon product code
DVCPRO50; 50 Mbps
DVCPRO; 25 Mbps
625i; Y; 25 Hz to 5.5 MHZ ( 0.5 dB), 5.75 MHZ (–2.0 dB)
P /P ; 25 Hz to 2.5 MHZ ( 0.5 dB), 2.75 MHZ (–2.0 dB)
B R
525i; Y; 30 Hz to 5.5 MHZ ( 1.0 dB), 5.75 MHZ (–2.0 dB)
P /P ; 30 Hz to 2.5 MHZ ( 1.0 dB), 2.75 MHZ (–2.0 dB)
B R
Better than 60 dB
Less than 1%
Max. 10 ns
BNC 3 (Y, P , P )
B R
Y; 1.0 Vp-p, 75
P /P ; 0.7 Vp-p, 75 (100% colour bar, 0% black level)
B R
2, loop-through, 75
Analogue composite, BNC
Complies with SMPTE 259M-C/EBU Tech.3267-E standard, BNC
Complies with SMPTE 305M/321M standard, BNC
input connector)
118 (E)
; 6.75 MHz (DVCPRO50)
R
on/off
2, loop-through, 75 on/off
2, active through (also serves as SDI
2, active through