Panasonic DVCPRO50 AJ-D960EG Operating Instructions Manual page 95

Video output signals and servo reference signal
Servo reference signal
The REF VIDEO input signal or video input signal is selected as the servo reference signal.
As shown in the figure below, the signal is selected in accordance with the setup menu
settings, VTR mode and availability of the video input signal.
EXT
Synchronization with the
REF VIDEO input signal
<Notes>
Synchronization is determined as follows depending on the availability of the REF VIDEO
input signal when "BB" or "CB" has been selected as the setup menu No. 600 (INT SG)
setting.
• When the REF VIDEO input signal is available: Synchronization with the REF VIDEO input
signal
• When the REF VIDEO input signal is not available: Internal synchronization
Start
What is the setup
INPUT
menu No. 304 (SERVO
REF) setting?
AUTO
YES
Is the unit in one of
the editing modes?
NO
YES
Has the unit been set to
the recording mode?
NO
NO
Is the REF VIDEO input
signal available?
YES
Internal synchronization
95 (E)
NO
Is the video input signal
available?
YES
Synchronization with
the video input signal