Tape Protect Menu - Panasonic DVCPRO50 AJ-D960EG Operating Instructions Manual

Setup menus
USER menu
<EDIT>
No.
308
309
310
311
312
313
314
315
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
EDIT 0000 N-DEF
RPLCE4 0001
0002
0003 CH1+CH2
EDIT 0000 N-DEF
RPLCEC 0001
0002
0003 CH1+2
CONFI 0000
EDIT 0001
AUD EDIT 0000
IN 0001
AUD EDIT 0000
OUT 0001
AUTO 0000
ENTRY 0001
CF ADJ 0000 PLAYER
SEL 0001 RECORD
AFTER 0000
CUE-UP 0001
71 (E)
The same type of setting as setup menu No. 305. This selects
the channel concerned when the CH4 edit preset is set in
CH1
compliance with the ON or OFF presetting for the analogue
CH2
audio signals designated by the controller.
0: Not set.
1: Compliance with analogue CH1 edit preset.
2: Compliance with analogue CH2 edit preset.
3: Compliance with analogue CH1 or CH2 edit preset.
The same type of setting as setup menu No. 305. This selects
the channel concerned when the CUE edit preset is set in
CH1
compliance with the ON or OFF presetting for the analogue
CH2
audio signals designated by the editor or controller.
0: Not set.
1: Compliance with analogue CH1 edit preset.
2: Compliance with analogue CH2 edit preset.
3: Compliance with either analogue CH1 or CH2 edit preset.
OFF This selects whether to conduct simultaneous playback while
editing is in progress.
ON
0: No simultaneous playback
1: Simultaneous playback
<Note>
Simultaneous playback is valid when the TAPE/EE switch is
set to TAPE.
This selects the connection method for the digital audio edit IN
CUT
point.
FADE
0: Cut processing
1: V Fade processing
CUT This selects the connection method for the digital audio edit
OUT point.
FADE
0: Cut processing
1: V Fade processing
DIS This selects whether the IN point is to be entered using the
PREROLL button when it has not been entered.
ENA
0: IN point is not entered.
1: IN point is entered.
This selects the CF adjustment deck with deck-to-deck
editing.
0: The player's edit IN/OUT points are adjusted. (reference as
the RECORDER side)
1: The recorder's edit IN/OUT points are adjusted. (reference
as the PLAYER side)
This selects the mode after cue-up operation is complete.
STOP
0: STOP mode
STILL
1: SHTL STILL mode
Description