2.2.1 AP Mode
See below for the typical network topology. Position device properly according to
practical network environment.
1.
Connect the LAN/WAN/POE port on device to the POE port on the injector.
2.
Connect the LAN port on the PoE injector to an uplink switch or router.
3.
All PCs in the range will then be able to connect to this SSID wirelessly for
Internet access.
Device operates in AP mode by default, so simply follow the topology above to
establish th network. To configure other features like wireless, simply access the
device web management utility. For details, see Chapter
Wireless N150 Long Range AP/Router
16