network (VPN) links.By default it is disabled. However if ISP enables MPPE on
his PPPoE server, you must also enable it on the device. Consult your ISP, if
you don't know whether he has enabled the MPPE or not
Ø
MTU: Maximum Transmission Unit. DO NOT change it from the factory default
of 1492 unless necessary. You may need to change it for optimal performance
with some specific websites or application software that cannot be opened or
enabled; in this case, try 1450, 1400, etc
Static IP
If your ISP assigns a fixed IP address to you, then select Static IP, and enter the IP
address, subnet mask, primary DNS and secondary DNS (optional) info provided
Wireless N150 Long Range AP/Router
27