Chapter5 Advanced Applications
The Advanced tab only works on router mode, it has the following 7 submenus:
Bandwidth Settings, Connection Status, DDNS, Virtual Server, DMZ Host, UPnP,
Routing Table and Static Routing.
5.1 Bandwidth Settings
Bandwidth control is used for limit internal network speed. It supports IP address
range
configuration. Click Add and below screen will appear.
Ø
Enable: Check/uncheck to enable/disable current entry.
Ø
When disabled, corresponding entry will not take effect though existing in
fact.
Wireless N150 Long Range AP/Router
53
\