Tenda teg2124t User Manual page 39

visible/ invisible to any wireless clients within coverage when they perform a
scan to see what's available. When disabled, this SSID becomes invisible to any
wireless clients within the coverage. Manually enter the SSID if you want to
connect to it
Ø 802.11 Mode: Select a wireless network mode.
11b mode: Select it if you have only Wireless-B clients in your wireless
network.
11g mode: Select it if you have only Wireless-G clients in your wireless
network
Ø
11b/g mixed mode: Select it if you have only Wireless-B and Wireless-G
clients in your wireless network
Ø 11b/g/n mixed mode: Select it if you have Wireless-b/g/n clients in your
wireless network
Ø Channel: For an optimal wireless performance, you may select the least
interferential channel. It is advisable that you select an unused channel or
Auto to let device detect and select the best possible channel for your wireless
network to operate on from the drop-down list
Ø Channel Bandwidth: Select a proper channel bandwidth to enhance wireless
performance. When there are 11b/g and 11n wireless clients, please select the
802.11n mode of 40M frequency band; when there are only non-11n wireless
clients, select 20M frequency band mode; when the wireless network mode is
11n mode, please select 20/40 frequency band to boost its throughput
Ø
TX Power: Select a proper transmission power level for device (Low power:
100mW, medium power: 300mW, high power: 500mW). The default TX
power level is High
Ø
Extension Channel: It is used to ensure N speed for 802.11n devices on the
network
Ø WMM-Capable: WMM is QoS for your wireless network. Enabling this option
may better stream wireless multimedia data (such as video or audio)
Wireless N150 Long Range AP/Router
39