Wan Medium Type - Tenda teg2124t User Manual

Ø DHCP Server: enable or disable the device's DHCP server feature. If enabled,
the DHCP server will assign IP addresses to requesting clients
Ø
Start IP Address: Specify the starting IP address for the DHCP server IP
assignment
Ø End IP Address: Specify the ending IP address for the DHCP server IP
assignment
Ø
Primary DNS Server: Specify a primary DNS address for requesting clients
Ø Secondary DNS Server: Specify a secondary DNS address for requesting
clients. This field is optional
Ø
Lease Time: The length of time for the IP address lease. Configuring a proper
lease time improves the efficiency for the DHCP server to reclaim disused IP
addresses
Ø
For example: If the lease time is set to one hour, then the DHCP server will
reclaim disused IP addresses every hour
3.5 WAN Medium Type
Here you can select a proper WAN medium type to use: Wireless WAN (WISP) or
Wired WAN to connect to the uplink device. Internet connection types are the same
for the two medium types.
Ø Wired WAN: Connect to uplink device via an Ethernet cable
Ø
Wireless WAN: Connect to uplink device (WISP AP) wirelessly
Please do following the steps as below if you connect to the Internet wirelessly.
1. Select Wireless WAN (WISP) and click Scan. Currently available wireless
networks will then be displayed.
Wireless N150 Long Range AP/Router
34