Ø
Access Control: Disabled by default. Click Enable to enable the feature
Ø
Deny Access to Wireless Network: Block only PCs at specified MAC
addresses from connecting to your wireless network
Ø
Allow Access to Wireless Network: Allow only PCs at specified MAC
addresses to connect to your wireless network
Click Add and below screen appears:
Ø
MAC Address: Enter the MAC address of a wireless client
Ø
Description: Briefly describe the current entry/rule
Ø
Status: Select Enable or Disable
Ø
Up to 6 rules can be added
Example: To allow only the PC at the MAC address of 00:90:4C:85:11:05 to
connect to your wireless network, do as follows:
1. Click Add, enter 00:90:4C:85:11:05 in the MAC Address field, select Enable
Wireless N150 Long Range AP/Router
45