Wireless N150 Long Range AP/Router
Chapter 2 Hardware Install
2.1 Hardware Install
Before you start configuring the device, follow below steps to install device. For
extended wireless coverage, use an external omni-directional antenna and place
device in the center of the area for better performance; to implement long range
P2P or P2MP wireless bridge, use the internal directional antenna and position
device properly for better performance.
2.1.1 Connect device to a power source
The device comes with a PoE injector. Please use it to power the device.
2.1.2 Network Connection
1. Connect the LAN/WAN/POE port on device to the PoE port on the injector using
an Ethernet cable.
11