Ø
WDS Status: Select Enable or Disable.
Ø
Scan: Click to scan wireless networks (SSIDs and BSSID) in the area after you
enable the WDS feature.
Ø
Remote Bridge's MAC Address: Enter the MAC address of the wireless
device you want to connect (link partner).
Take two W1500As as an example to illustrate WDS implementation.
Select Wireless AP from WDS Mode and Enable from WDS Status.
1. Directly enter the MAC address of the link partner if you already know it and
then click OK.
2. Enable scan on one associated device to search for the link partner.
1) Click Scan.
Wireless N150 Long Range AP/Router
48