Wireless N150 Long Range AP/Router
2. Select Enable to enable the Optimum Position function.
Select MAC: Select the MAC address of the remote device to bridge . (Before
performing this action, make sure you have added it on WDS or Universal
Repeater section)
Place and hold the device in different places for a certain period of time (5 seconds
is recommended), observe signal strength change from the graph. Position device
exactly where as it is when strongest signal appears on the graph.
Note:
1. The smallest signal strength absolute value on vertical axis indicates best signal
strength.
2. When you have positioned the device ideally for bridge, remember to disable the
Optimum WDS Position function. So it may not affect your wireless
performance.
51