Wireless Ap Mode; Chapter 3 Working Modes Overview - Tenda A6 User Manual

c. Select "Tenda_××××××"and click "Connect".

Chapter 3 Working Modes Overview

The device provides 5 working modes and is preset to
wireless AP mode by default. You can select a mode that best fits
yourself and the device delivers corresponding functions
accordingly.

3.1 Wireless AP Mode

In this mode, the device converts the wired signal into
wireless signals, extending existing network coverage. It works as
a central access point for multiple wireless clients (generally,
wireless adapters) concurrently. Simply connect the device to
Internet-enabled broadband at hotel, home or office without
configuration required on the device and multiple users can share
Internet access. Note that you must config same security settings
on your adapter to connect to the device if you encrypt the
device wireless network. This mode is also your best choice if
there is already a wired router on existing network. Simply
connect the device to the wired router using an Ethernet cable
(For details, refer to section 5-1). Refer to below topology for
connecting network devices involved when using this mode.
Wireless N150 Mini AP/Router
8