NetModule NB3700 User Manual page 124

SNMP Authentication
When running in SNMPv3, it is possible to configure the following authentication set-
tings:
Parameter
Authentication
Encryption
In general, the admin user can read and write any values. Read access will be granted
to any other system users.
There is no authentication/encryption in SNMPv1/v2c and should not be used to set
any values. However, it is possible to define its communities and authoritive host which
will be granted administrative access.
Parameter
Read community
Admin community
Allowed host
Attention must be paid to the fact that SNMP passwords have to be more than 8
characters long. Shorter passwords will be doubled for SNMP (e.g. admin01 becomes
admin01admin01).
Please note that the SNMP daemon is also listening on WAN interfaces and it is therefore
suggested to restrict the access with the firewall.
NB3700 User Manual 3.8
SNMPv3 Authentication
Defines the authentication (MD5 or SHA)
Defines the privacy protocols to use (DES or AES
SNMPv1/v2c Authentication
Defines the community name for read access
Defines the community name for admin access
Defines the host which is allowed for admin access
124