NetModule NB3700 User Manual page 192

A.5. SDK Examples
Event
best-operator.are
candump.are
config-summary.are
dio-monitor.are
dio-server.are
dio.are
dynamic-operator.are
email-to-sms.are
etherwake.are
gps-broadcast.are
gps-monitor.are
gps-udp-client-
compat.are
gps-udp-client.are
led.are
modbus-rtu-master.are
modbus-rtu-slave.are
NB3700 User Manual 3.8
Description
This script will scan for operators on startup and choose the
one with the best signal
This script can be used to receive CAN messages
This script shows a summary of the currently running con-
figuration.
This script monitors the DIO ports and sends a SMS to the
specified phone number.
This script implements a TCP server which can be used to
control the DIO ports.
This script can be used to set a digital output port.
This script will scan Mobile2 and dial the appropriate SIM
on Mobile1
This script implements a lightweight SMTP server which is
able to receive mail and forward them as SMS to a phone
number.
This script can be used to wake up a sleeping host (WakeOn-
Lan)
This script sends the local GPS NMEA stream to a remote
UDP server (incl. device identity).
A script for activating WLAN as soon as GPS position
(lat,lon) is within a specified range.
This script sends the local GPS NMEA stream (incl. seri-
al/checksum) to a remote UDP server.
This script sends the local GPS NMEA stream to a remote
UDP server.
This script can be used to set a LED
This script can be used to read messages from the serial
port.
This script implements a modbus slave server
192