NetModule NB3700 User Manual page 169

command=get&arg0=admin . password&arg1=admin . debug&arg2=admin .
access
will lead to cli being called as :
cli get " admin . password " " admin . debug " " admin . access "
It supports whitespaces but please be aware that any special
characters in
the URL must be specified according to RFC1738 ( usually done by
common
clients such as wget , lynx , curl ) .
Response :
The returned response will always contain a status line in the
format :
<return >: <msg>
with return values of OK if succeeded and ERROR if failed . Any
output from the commands will be appended .
Examples :
OK : status command successful
ERROR : authentication failed
status - Display status information
Key usage :
command=status [& arg0=<section >]
Notes :
Available sections can be retrieved by running
command=status&arg0= h .
Please note that the status summary can be displayed without
authentication .
Examples :
http : / / 1 9 2 . 1 6 8 . 1 . 1 / cli . php ? version=2&output=html&usr=admin&pwd=
admin01&command=status&arg0= h
http : / / 1 9 2 . 1 6 8 . 1 . 1 / cli . php ? version=2&output=html&usr=admin&pwd=
admin01&command=status&arg0=summary
NB3700 User Manual 3.8
169