NetModule NB3700 User Manual page 82

Parameter
use compression
use keepalive
redirect gateway
allow duplicates
verify certs
OpenVPN Expert Configuration (Client)
The expert configuration mode offers a straightforward way to configure a tunnel by
simply uploading a zip package containing the required configuration and optionally
key/certificate files. A client tunnel usually consists of the following files:
Parameter
client.conf
ca.crt
client.crt
client.key
client.p12
ta.key
Please note that you may specify arbitrary file names, however, the configuration file
suffix must be .conf and all files referred in the configuration file must correspond to
relative path names.
OpenVPN Expert Configuration (Server)
A server tunnel typically requires the following files:
Parameter
server.conf
NB3700 User Manual 3.8
OpenVPN Options
Enable or disable LZO packet compression
Can be used to send a periodic keepalive packet in order to
keep the tunnel up despite of inactivity
By redirecting the gateway, all packets will be directed to
the VPN tunnel. Please ensure that essential services (such
as DNS or NTP servers) can be reached at the network
behind the tunnel. In doubt, create an extra static route
pointing to the correct interface.
Allow multiple clients with the same common name to con-
currently connect.
Check peer certificate against local CRL.
Client Expert Files
OpenVPN configuration file (see
for available options)
Root certificate authority file
Certificate file
Private key file
PKCS#12 file
TLS authentication key file
Server Expert Files
OpenVPN configuration file
82
http://www.openvpn.net