Intercom Calling - Panasonic DBS 824 Manual

SLT Features
• DND and Absence Messages cancel Call Forwarding.
- Direct trunk calls
- Transferred trunk calls.
• The DND feature cannot be activated at an extension selected to receive

Intercom Calling

(CPC-S and CPC-M)
Descriptions
The DBS 824 provides two methods of intercom calling: voice calling and
tone calling.
Voice Calling. With voice calling, intercom calls are connected
immediately, without a ringing tone.
Tone Calling. With tone calls, a ringing tone is sent to the called extension.
System programming determines whether the DBS 824 uses voice or tone
calling as a default. If voice calling is the default, dialing a "1" after the
extension number changes the call to a tone call. If tone calling is the default,
dialing a "1" results in a voice call.
Operation
To make a Voice Call:
1. Lift the handset.
2. Dial the extension number.
3. If the system default is tone calling, dial a "1."
Revised April 2000
Calls to an extension with DND or Absence Message turned on are treated
differently, depending on whether they are trunk or intercom calls.
Intercom calls receive busy tone; trunk calls are routed to the extension
defined in permanent call forwarding.
The following types of incoming trunk calls will follow permanent call
forward settings:
Call Forwarding.
DBS 824-3.0/3.2-700

Intercom Calling

5-24