SLT Features
• FF1 (System):Extension Transfer Recall Timer for Intercom Calls
Considerations
• In order for users to transfer calls by flashing the switchhook, dialing the
• You cannot transfer a call to an extension that has Do Not Disturb or
• You can transfer a call to an extension that has Call Forwarding activated.
• When you transfer a call to an extension that is busy or does not answer
Screened Transfer
Description
Using the Screened Transfer feature, you can contact a third party via an
extension before transferring a call to that party.
Operation
To use Screened Transfer when your system is set for Onhook
Transfer:
1. Flash the switchhook to place the call on hold.
2. Dial the extension number to which the call is to be transferred.
3. When your call is answered, inform the third party of the transfer.
4. Replace the handset.
Revised April 2000
extension, and going onhook, the Onhook Transfer feature must be
enabled.
Absence Message activated.
The transferred call will follow the call forwarding path of the extension it
is transferred to.
For example, if extension "A" is covered to extension "B," calls that are
transferred to extension "A" will be forwarded to extension "B."
and does not have Call Forwarding activated, the transfer will recall your
extension after the Transfer Recall Timer expires.
The phone issues intercom dial tone.
The third party need only pick up the handset to speak to the outside line.
DBS 824-3.0/3.2-700
Call Transfer
5-15