Call Waiting - Panasonic DBS 824 Manual

Call Waiting

4. Dial "8."
5. Replace the handset.
Related Programming
• FF1 (System): Onhook (Automatic) Transfer
• FF1 (System): Recall Timer for Extension -Transferred CO Calls
• FF1 (System): Recall Timer for Extension -Transferred CO Calls
Considerations
• You cannot transfer a call to an extension that has Do Not Disturb or
• You can transfer a call to an extension that has Call Forwarding activated.
• When you transfer a call to an extension that does not answer and does not
Call Waiting
(CPC-S and CPC-M)
Description
You can send a Call Waiting signal, followed by a brief LCD message, to a
busy extension. The party receiving the message need only replace the
handset and then pick it up again to be automatically connected to your
extension.
The following messages can be sent using the Call Waiting feature:
4-16
The third party need only pick up the handset to speak to the outside line.
Absence Message activated.
The transferred call will follow the call forwarding path of the extension it
is transferred to.
For example, if phone "A" is covered to phone "B," calls that are
transferred to phone "A" will be forwarded to phone "B."
have Call Forwarding activated, the transfer recalls to your extension after
the Transfer Recall Timer expires.
DBS 824-3.0/3.2-700
DSLT Features
Revised April 2000