Dial "0" For Attendant - Panasonic DBS 824 Manual

SLT Features
To add an outside number:
1. Flash the switchhook to place the current call on hold.
2. Dial a trunk group number (81-86 or 9).
3. Dial the outside number.
4. Flash the switchhook when your call is answered.
Related Programming
• FF3 (Extension): Single Line Telephone Hookflash
Considerations
• Call Waiting responses cannot be made during conference calls.
• A switchhook flash is ignored during a conference call.
• Calls forwarded externally cannot create a conference.
• The Hold feature cannot be used during a three-party conference.

Dial "0" for Attendant

(CPC-S and CPC-M)
Description
Users can call the Attendant from any extension by pressing "0."
If multiple attendants are assigned, a dial "0" call goes to Attendant "1" first.
If attendant "1" is busy, the call goes to Attendant "2." The call continues to
transfer to the next attendant in the attendant group if necessary.
A maximum of four attendants can be assigned.
Operation
1. Lift the handset.
2. Press "0."
Related Programming
Revised April 2000 DBS 824-3.0/3.2-700

Dial "0" for Attendant

5-21