Panasonic DBS 824 Manual page 188

DSLT Features
Table 4-4. Call Waiting Text Messages
Message codes 0-4 cannot be used.
Operation
To Set Call Waiting:
1. Lift the handset.
2. Dial the extension number.
3. Upon hearing busy tone, press "3."
4. If you wish to send a text message, dial the desired message code (5-7 or
5. Remain on the line until the called party picks up.
To answer Call Waiting (after disconnecting the current call):
1. Replace the handset.
2. Pick up the handset.
To answer Call Waiting (without disconnecting the current call):
1. Press HOLD.
Revised April 2000
Message
Code
5
6
7
9
9).
The message appears on the called party's phone if the called party has a
display phone. (If the extension does not have a display, it will continue to
issue a call waiting tone.)
The current call is disconnected.
You are automatically connected to the extension sending the Call
Waiting.
• The current call is disconnected.
DBS 824-3.0/3.2-700
Message
"Visitor Here"
"Need Help"
"Important"
"Emergency"
Call WaitingCall
4-17