One-Touch Keys
To assign access codes to a One-Touch key:
1. Press the ON/OFF key.
2. Press the PROG key.
3. Press the One-Touch key to be programmed.
4. Enter the access number.
5. Press the REDIAL key.
6. Press the HOLD key.
7. Press the ON/OFF key.
To check a programmed One-Touch key:
1. Press the ON/OFF key.
2. Press the CONF key.
3. Press the One Touch key to be checked.
4. Press the ON/OFF key.
Considerations
• If the pause following an access code is too short, press the REDIAL key
3-64
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
This inserts a pause between the access code and the telephone number.
The ON/OFF LED goes off.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
"C" appears in the display.
The programmed data appears on the display.
• The ON/OFF LED goes off.
• The date and time appears on the display.
more than once.
DBS 824-3.0/3.2-700
Key Telephone Features
Revised April 2000