Panasonic DBS 824 Manual page 131

Intercom Calling
Voice Calling. With voice calling, intercom calls are connected immediately,
without a ringing tone.
Tone Calling. With tone calls, a ringing tone is sent to the called extension.
System programming determines whether the DBS 824 uses voice or tone
calling as a default. If voice calling is the default, dialing "1" after the
extension number changes the call to a tone call. If tone calling is the default,
dialing "1" results in a voice call.
Operation
To make a Voice Call:
1. Pick up the handset.
2. Dial the extension number (10-69) or (100-699).
3. If the system default is tone calling, dial "1."
4. Complete the call and replace the handset.
To transfer a call using Voice Calling:
1. Press the HOLD key.
2. Dial the number of the extension to which the call will be transferred.
3. If the system default is tone calling, dial "1."
3-44
The phone issues intercom dial tone.
Note: If you are calling from an extension programmed for Prime Line
Preference, press the FF key programmed for intercom operation.
• "Talk-EXT XXX" (where "XXX" is the extension) appears on the
display. If the extension name has been stored, that name appears on
the display after "Talk" instead of "-EXT XX."
• The EXT LED lights.
The EXT LED goes off.
• The EXT LED flashes.
• "Hold-EXT XXX" (where "XXX" is the extension) appears on the
display.
DBS 824-3.0/3.2-700
Key Telephone Features
Revised April 2000