Pooled Trunk Access - Panasonic DBS 824 Manual

Digital business system
Hide thumbs Also See for DBS 824:
Table of Contents

Advertisement

Pooled Trunk Access

Pooled Trunk Access

(CPC-S and CPC-M)
Description
The DBS 824 system supports up to eight outside lines. These lines can be
divided into seven Pooled Trunk groups. If you assign an FF key as an MCO
or ML key, the DBS 824 can automatically select an open line from the
Pooled Trunk group assigned to that key.
Even if all the outside lines assigned to an extension are busy, you can access
a free line by choosing an outside line group number. Group numbers 9 and
81-86 are available.
Operation
To select a Pooled Trunk group using a pre-programmed FF key:
1. Press the ON/OFF key.
2. Press the ML or MCO key.
3. Dial the telephone number.
4. Complete the call and replace the handset.
To select a Pooled Trunk group that is not assigned to an FF key:
1. Press the ON/OFF key.
3-68
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
• The LED of the Pooled Trunk key lights green.
• The phone issues outside dial tone.
• "CO TALK #XX" (where "XX" is the line number) appears.
The number appears on the display.
The LED of the ML or MCO key goes off.
• The phone issues intercom dial tone.
DBS 824-3.0/3.2-700
Key Telephone Features
Revised April 2000

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vb42050 - dbs 824 port sys op

Table of Contents