Dial "0" For Attendant; Direct Trunk Access - Panasonic DBS 824 Manual

DSLT Features

Dial "0" for Attendant

(CPC-S and CPC-M)
Description
The Attendant can be called from any extension by pressing "0."
If multiple attendants are assigned, dial "0" calls goes to Attendant "1" first.
If attendant "1" is busy, the call then goes to Attendant "2." The call
continues to transfer to the next attendant in the attendant group, if necessary.
A maximum of four attendants can be assigned.
Operation
1. Lift the handset.
2. Press "0."
Related Programming
• FF1 (System): Second Attendant Position
• FF1 (System): Third Attendant Position
• FF1 (System): Fourth Attendant Position
• FF1 (System): Attendant Transfer Extension

Direct Trunk Access

(CPC-S and CPC-M)
Description
Extension users can access specific trunks for outgoing calls. Extension users
can also use Direct Trunk Access to test trunks or to access data trunks.
Operation
1. Lift the handset.
Revised April 2000 DBS 824-3.0/3.2-700
Dial "0" for AttendantDial
4-21