Panasonic DBS 824 Manual page 114

Key Telephone Features
To answer Call Waiting using the Talk Back key:
A "Talk Back" key can be assigned to an FF key. The Talk Back key allows
you to answer a waiting call without disconnecting the original call.
1. The LED of the Talk Back key flashes red, indicating Call Waiting has
2. Press the Talk Back key to answer Call Waiting.
3. Press the Talk Back key again to return to the original call.
Related Programming
• FF1 (System): Extension Class of Service Setting
• FF3 (Extension): Extension Class of Service Assignment
• FF3 (Extension): Call Waiting/OHVA
• FF5 (FF Key Settings): FF Key Assignments for Extensions
Considerations
• Message code 8 cannot be used from an SLT. (The digit "8" is used to
• Call Waiting can be used without the user entering a message code.
• Call Waiting is cancelled when the sender replaces the handset.
• If the called extension has DND activated, has a call on hold, is ringing
• A call on an outside line can be placed on hold before Call Waiting is
Revised April 2000
Note: To answer a call waiting tone, you may flash the switchhook rather
than hang up. If you flash the switchhook, you are immediately connected
to the waiting party.
been sent.
• The LED of the Talk Back key flashes green.
• The current call is held automatically.
The LED of the Talk Back key goes off.
transfer calls on SLTs.)
(from another call), or is engaged in a conference call, Call Waiting cannot
be sent.
answered to avoid terminating the original call. An Intercom Call,
however, must be terminated before Call Waiting can be answered.
DBS 824-3.0/3.2-700
Call Waiting
3-27