Setting Output Signals; Assigning Output Signals; Setting The Down-Converter - Panasonic AV-HS6000 Operating Manual

Setting output signals

[SDI OUT 1] to [SDI OUT 16] are used for SDI signal output.
The functions differ depending on the output signals.
@
NOTE
t 1080/24PsF, 1080/23.98PsF, 720/59.94p, and 720/50p will be available in V2.00.00 or higher.
r List of settings by output signal
f "l" indicates enabled, and "―" indicates disabled.
[SDI OUT 1] - [SDI OUT 12]
[SDI OUT 13], [SDI OUT 15]
[SDI OUT 14], [SDI OUT 16]
* This function will be available in V2.00.00 or higher.
For details, refer to "Color corrector" (page 74).

Assigning output signals

Assign output signals to [SDI OUT 1] through [SDI OUT 16].
1
Select the <IN OUT> button → [SDI OUT] → [Assign] tab.
2
Set the output signals to assign.
f Output signals that can be assigned are as follows.
ME1PGM, ME2PGM, DSKPGM1,
DSKPGM2
DSKPVW1, DSKPVW2
AUX1 ‑ AUX16
ME1CLN, ME2CLN, DSK1CLN,
DSK2CLN, DSK3CLN, DSK4CLN
MV1 ‑ MV4
ME1KEYPVW, ME2KEYPVW,
SEL KEYPVW
ME1PVW, ME2PVW
f For details on ME/DSK output signal settings, refer to "Setting the ME output and DSK output" (page 132).
Setting the down‑converter
For [SDI OUT 14], [SDI OUT 16], the down-converter is available.
When the system format is 1080/59.94i, 720/59.94p, the image is output in 480/59.94i format.
When the system format is 1080/50i, 720/50p, the image is output in 576/50i format.
This function cannot be selected when the system format is SD (480/59.94i, 576/50i).
1
Select the <IN OUT> button → [SDI OUT] → [Down Converter] tab.
2
Select an item in [Enable] in the [SDI OUT 14]/[SDI OUT 16] column.
[Off]
[On]
3
Select an item in [Limit] in the [SDI OUT 14]/[SDI OUT 16] column.
f Set the color range.
[Off]
[108%]
[104%]
[100%]
4
Select an item in [Scale] in the [SDI OUT 14]/[SDI OUT 16] column.
f Select the scaling system.
Chapter 6 Input/Output Signal Settings — Setting output signals
[Assign]
l
l
l
Outputs an image with the wipe, mix, key, downstream key or other effect to the switcher's main line output.
Outputs the DSK preview signal with the ME1PVW or ME2PVW output signal in background.
Outputs the signal selected by the 16 lines of AUX buses ([AUX1] to [AUX16]).
Outputs clean signals before key effects were added. ME1CLN and ME2CLN signals can be switched to the Key Out
signals which are used for key combination.
Outputs the MultiView display signal. Multiple input and output signals are reduced and output to a single screen.
(page 114)
Outputs the preview signal exclusively for the key.
Outputs the preview signals for BKGD, KEY1 to KEY4 which were selected in the next transition.
Disables the down-converter.
Enables the down-converter.
Does not restrict the color range.
Restricts the amplitude level of the colors (R, G, and B) to 0% to 108%.
Restricts the amplitude level of the colors (R, G, and B) to 0% to 104%.
Restricts the amplitude level of the colors (R, G, and B) to 0% to 100%.
Color corrector*
―
l
l
– 112 –
[Down Converter]
―
―
l