Setting Standard Tone - Samsung SL-X7600GX Service Manual

4. Troubleshooting

4.7.14. Setting Standard Tone

1. Setting Standard Tone
•
<Purpose>
-
To adjust the color tone to the standard set by factory.
NOTE
▪
After first machine installation, this functions must be executed.
▪
After replacing the ITB unit or cleaning the CTD sensor, executing this function is recommended.
•
<Procedure>
1) Load A4 or Letter with SEF (Short Edge Feeding) direction on tray.
2) Select [Setting] on main UI.
3) Log in as Admin.
4) Select [Adjustment] -> [Tone Adjustment] -> [Setting Standard Tone].
5) Select "OK" on confirmation window.
6) The scan ID chart will be printed out.
7) Load the chart on platen glass. (Horizontal direction)
8) Start scan.
9) When the scan complete window appears, select "OK".
4-231 Copyright© 1995-2013 SAMSUNG. All rights reserved.