Error Code; Error Message; Replace With New Yellow Developer Unit; Yellow Developer Failure: #C8-2210. Turn Off Then On - Samsung SL-X7600GX Service Manual

4. Troubleshooting

► Error Code

C8–2130

► Error message

Replace with new yellow developer unit

► Symptom
The life of the yellow developer unit expires has expired.
► Troubleshooting method
1) Turn the machine off.
2) Replace the yellow developer unit.
3) Turn the machine on then print the test page.
► Error Code
C8–2210
C8–2310
C8–2313
► Error message

Yellow Developer Failure: #C8-2210. Turn off then on

Yellow Developer Failure: #C8-2310. Install yellow developer unit again

Yellow Developer Failure: #C8-2313. Turn off then on. Please call for service if the problem persists

► Symptom
The yellow developer unit has a problem with toner supply or sensor calibration.
► Troubleshooting method
1) Open the front cover. Then, remove the waste toner container.
2) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.)
3) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed.
4) Install the waste toner container. Close the front cover.
5) Turn the machine off then on.
6) If the problem persists, remove and reinstall the yellow developer unit.
7) If the problem persists, replace the yellow developer unit.
4-123 Copyright© 1995-2013 SAMSUNG. All rights reserved.