3. Disassembly and Reassembly
3.3.26. WTB Drive Unit
1. Remove the inner cover. (Refer to 3.3.23.)
3.3.27. HDD (Hard Disk Drive)
1. Remove 2 screw-caps and 2 screws. Then remove the
front-top left cover.
2. Remove 2 screw-caps and 2 screws. Then remove the
Exit Tray.
3-45
2. Unplug the connector. Remove 2 screws. And release
the WTB drive unit .
3. Release the HDD cover after removing 4 screws.
4. Remove 4 screws. Unplug the HDD cable. And release
the HDD with its holder.
Copyright© 1995-2013 SAMSUNG. All rights reserved.