Horizontal Periodic Black Band Or Dot - Samsung SL-X7600GX Service Manual

4.7.3. Horizontal periodic Black Band or Dot

A. Typical faulty images
B. Troubleshooting procedure
Step Cause
1 Check if the horizontal band or spot occurs at approx.
38 mm period.
Check if the surface of the charge roller is
•
contaminated or scratched.
2 Check if the horizontal band or spot occurs at approx.
94 mm period.
Check if the surface of the OPC drum is
•
contaminated or scratched.
3 Check if the charge roller contact plate is contaminated
or has the debris.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
Action
1) Clean the contaminated surface on the charge
roller with a soft cloth.
2) If the surface is scratched, replace the drum unit.
1) Clean the contaminated surface on the OPC drum
with a soft cloth.
2) If the surface is scratched, replace the drum unit.
1) Clean the charge roller contact plate.
2) If the problem persists, replace the drum unit.
3) If the problem persists after replacing the drum
unit, replace the HVPS board.
4. Troubleshooting
4-220