Hardware Configuration - Samsung SL-X7600GX Service Manual

A3 color copier

Table of Contents

2. Product Specifications and Description

2.12. Hardware Configuration

The SL-X7600/7500/7400GX , SL-X7600LX, SL-X703GX Electrical Circuit System consists of the following :

Main Controller (Main board)

ADF(DSDF / RADF) Controller

Diagram of the MX X7 Series Electrical Circuit

TYPE 3( Opt .)

DUPLEX 1/ 2/ 3

The main controller handles the video controller, engine controller and scan controller.

The main controller receives print data from the host through the network or USB port, and it receives copy data from the

Scan Controller. It takes this information and generates printable video bitmap data. It controls all modules required to

print, that is, LSU, HVPS, FAN, Fuser, etc.

The main controller communicates with the drive system and other devices through UART(Universal Asynchronous

Receiver Transmitter). It communicates with the toner cartridge and drum/developer unit through I2C to check their life.

The main controller uses a Quad Core CPU 1.5GHZ, DDR3 4GB memory, Micro SD 4GB, 320GB SATA HDD to control

the engine driving, video signal processing, and user interface. successfully.

A MICOM at the main controller controls the fuser lamp on/off and system power according to an optimized energy-saving

algorithm for optimal efficiency. It also communicates with the OPE Controller through the USB 3.0 protocol to display

the system information on LCD.

MAIN CONTROLLER

CST LOCK 1, 2

T / C SENSOR

TSP ( C - type)

Table of Contents