2. Product Specifications and Description
2.12.7. Eraser PBA
Eraser PBA has one LED. This LED is used for erasing the negative charges on the surface of the drum after printing.
2.12.8. Fuser PBA
The Fuser PBA includes CRU memory for Fuser Unit Life Cycle counting. It also provides a connection interface for
the pressure sensor.
•
Connection
1
2
•
Information
-
Part Code : JC92–02470A
-
Part Name : PBA-FUSER
2.12.9. Waste Sensor PBA
The Waste Sensor PBA detects the waste toner level inside the waste toner container.
2-116
•
Fuser EEPROM, Pressure Sensor I/F
Pressure Sensor (Not used)
•
Information
•
Part Code : JC92–02244A
Part Name : PBA-ERASER
•
Information
Part Code : JC92–02471A
•
Part Name : WASTE SENSOR RX
•
Copyright© 1995-2013 SAMSUNG. All rights reserved.