Before Connecting The Oven - Asko OCS8456S Operating Instructions Manual

Safe and correct use of the steam oven
Leave the appliance at room temperature for some
time before connecting it to the power mains to allow all
components to adapt to room temperature. If the oven
is stored at a temperature near or below freezing point,
there is a danger for some components, especially the
pumps.
The appliance should not operate in an environment
with a temperature below 5 °C. Below this temperature,
the water that remains in the pumps could freeze. If the
appliance is turned on in such conditions, the pumps
could be damaged.
If the appliance does not work correctly, disconnect it
from the power mains.
Do not store items in the oven, which could cause
danger when the oven is switched on.
Do not use distilled water that is not suitable for
ingestion.
After the steam cooking is completed, there is some
residual steam in the oven. Open the oven door carefully,
as there is danger of scalding with steam.
Clean the oven once it has cooled down to room
temperature.
After the cooking process, the remaining water in the
steam system is pumped back into the water tank.
Therefore, the water there could be hot. Be careful when
emptying the water tank.
To prevent the build-up of limescale, leave the oven door
open after cooking to allow the oven cavity to cool down to
room temperature.

BEFORE CONNECTING THE OVEN:

Carefully read the instructions for use before
connecting the appliance. Repair or any warranty
claim resulting from incorrect connection or use of the
appliance shall not be covered by the warranty.
9