Troubleshooting Table - Asko OCS8456S Operating Instructions Manual

TROUBLESHOOTING TABLE

Problem/error
There is no response of the
sensors; the display is frozen.
The main fuse in your home trips
often.
The oven lighting does not work.
The pastry is underdone.
Error code is displayed:
ERRXX ...
* XX denotes the number/code of
the error.
Water is not pumped into the
steam system.
If the problems persist despite observing the advice
above, call an authorized service technician. Repair or
any warranty claim resulting from incorrect connection
or use of the appliance shall not be covered by the
warranty. In this case, the user will cover the cost of
repair.
Before the repair, disconnect the appliance from the
power mains (by removing the fuse or by removing the
plug from the wall outlet).
50
Solution
Disconnect the appliance from the power mains for a few minutes (undo the fuse
or switch off the main switch); then, reconnect the appliance and switch it on.
Call a service technician.
The process of changing the light bulb is described in the chapter.
Cleaning and Maintenance.
There is an error in the electronic module operation. Disconnect the appliance
from the power mains for a few minutes. Then, reconnect it and set the time of
day.
If the error is still indicated, call a service technician.
Check the water level in the water tank.
Not enough water in the water tank.
Make sure the tubes on the back of the water tank and the holes are not clogged.