Step 6: Selecting Additional Functions - Asko OCS8456S Operating Instructions Manual

STEP 6: SELECTING ADDITIONAL FUNCTIONS

Steam clean
Use it to remove stains. Pour water into the deep baking tray and place it in the lower guide. After 13 minutes, food
residues on the enamel surfaces will have softened and they will be easy to wipe off with a damp cloth.
Use this function when the oven has fully cooled down! (See chapter CLEANING AND MAINTENANCE.)
Defrosting
In this mode, the air will circulate without any heaters operating. Only the fan will be activated. Use this function to
slowly defrost frozen food (cakes, pastry, bread, rolls, and deep-frozen fruit).By selecting the relevant symbol you
may specify the type of food, weight, or defrosting start and end time.Halfway through the defrost time, the pieces
should be turned over, stirred and separated if they were frozen together.
Quick preheat
Use the preheat function if you wish to heat the oven to the desired temperature as quickly as possible. This mode is
not appropriate for cooking. When the oven heats up to the selected temperature, the preheat process is completed
and the oven is ready for cooking with the selected cooking mode.
Plate heating
Use this function to reheat your dinnerware (plates, cups) before serving food in it to keep the food warm longer.
Select the symbol to set the temperature, and reheating start and end time.
Regenerate
This mode is used for reheating cooked food. Owing to the use of steam, there is no loss of quality. Taste and texture
are preserved as though the dish was freshly-cooked. A variety dishes can be regenerated simultaneously.
• With this function, the user can set the regeneration process start and end time.
24
Choose Extra in the main menu to display the
extra/additional function menu.
Some functions are not available with some
systems; an acoustic signal will indicate such
cases.
When the cooking proces is complete, turn the
KNOB to display the End menu with a display of
symbols.