Table of Contents
Advertisement
TESTING WATER HARDNESS
Water hardness test should be carried out before fi rst use.
A warning will appear on the display: "Use the test paper to measure water hardness."
4 green stripes
1 red stripe
2 red stripes
3 red stripes
4 red stripes
The highest water hardness is set as a factory default.
CHANGING THE WATER HARDNESS SETTING
Water hardness can also be set in the menu CHOOSING THE GENERAL SETTINGS.
If the correct water hardness level is not set, this could
affect appliance operation and its useful life.
Soak the test paper strip (supplied with the
appliance) in water for one (1) second.
Wait one minute and observe the number of stripes
on the paper. Enter the information on the number
of stripes into the appliance. Rotate the KNOB and
Soft
confi rm the selection with the CHECK MARK.
Slightly hard
Medium hard
Hard
Very hard
11
Hide quick links:
Advertisement
Table of Contents
