Technical Specifications - ACME LED-MB500 User Manual

moisture.
 DO NOT open the unit within five minutes after switching off.
 The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
For AC 120V, 60Hz power supply, maximum fixtures that can be connected together from
the same mains outlet is 3pcs;
For AC 230V, 50Hz power supply, maximum fixtures that can be connected together from
the same mains outlet is 7pcs;
Caution
There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any
repairs yourself. In the unlikely event your unit may require service, please contact your nearest
dealer.
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is
firmly fixed to avoid vibration and slipping while operating. And make sure that the structure to
which you are attaching the unit is secure and is able to support a weight of 10 times of the unit's
weight. Also always use a safety cable that can hold 12 times of the weight of the unit when
installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of the
touch of people and has no one pass by or under it.

2. Technical Specifications

DMX channel modes: 8/11CH
3 DMX control modes: DMX, Master/Slave Mode, Sound Active mode
1 Rotation Gobo Wheel
1 Color Wheel
Option easy controller CA-8 for instant lighting shows
3A