1. Manuals
  2. Brands
  3. ACME Manuals
  4. Light Fixture
  5. GEIST BEAM
  6. User manual

ACME GEIST BEAM User Manual

Hide thumbs Also See for GEIST BEAM:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for ACME GEIST BEAM

Summary of Contents for ACME GEIST BEAM

  • Page 2: Table Of Contents

    CONTENTS 01/ Safety Instructions ....................2 02/ Technical Specifications ..................6 03/ Control Panel ......................8 04/ Fixture Installation ....................9 05/ Effect Wheels ......................11 5.1 Replacing Rotating Gobos ................12 06/ How To Set The Unit .................... 15 6.1 Main Functions ....................

  • Page 3: 01/ Safety Instructions

    01/ Safety Instructions Please read the instruction carefully which includes important information about the installation, usage and maintenance. WARNING Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction manual. Important: Damages caused by the disregard of this user manual are not subject to warranty.
  • Page 4 off the mains power immediately. DO NOT operate in a dirty or dusty environment. DO clean the fixture regularly.  DO NOT touch any wire during operation as there might be a hazard of electric shock.  Avoid entanglement of the power cord with other wires. ...
  • Page 5 01/ Consignes de sécurité Veuillez lire attentivement les instructions qui contiennent des informations importantes sur l'installation, l'utilisation et l'entretien. ATTENTION Veuillez conserver ce guide de l'utilisateur pour une consultation future. Si vous vendez l'appareil à un autre utilisateur, assurez-vous qu'il reçoive également ce manuel d'instructions.
  • Page 6 pour éviter tout risque d'incendie. Assurez-vous que le cordon d'alimentation n'est pas pincé ou endommagé; remplacez-le  immédiatement s'il est endommagé. La température de surface de l'unité peut atteindre 65℃. NE PAS toucher les capots à  mains nues pendant son fonctionnement. Évitez que des liquides inflammables, de l'eau ou du métal ne pénètrent dans l'appareil.

  • Page 7: 02/ Technical Specifications

    02/ Technical Specifications Power Voltage 100-240V~ 50/60Hz Power Consumption 700W Light Source SUL450N-80-R00-000 Color Temperature 7000K Beam Angle 3° 0-100% smooth dimming; outstanding strobe effect with variable Dimmer/Strobe speed Color Wheel 8 fixed colors plus 1 soft filter and white, with rainbow effect Static Gobo Wheel 10 gobos plus open Gobo Wheel...
  • Page 8 Description for power cord set should be used: Listed SJT flexible cord with L6-15P plug, minimum rating: 300V, 90°C, VW-1, 16AWG x 3C, and terminated with cord connector model SAC3FX with rating 250V, 16A by NINGBO HAISHU DISTRICT SEETRONIC ELECTRONIC CO., LTD. The length of power cord shall be at least 914mm (lt is to be measured from the face of attachment plug to the face of connector).

  • Page 9: 03/ Control Panel

    03/ Control Panel 1. Display To show the various menus and the selected function MENU To enter into move backward or leave the menu  UP To go backward to move up in the menu 2. Buttons  DOWN To go forward to move down in the menu ENTER To perform the desired functions 3.

  • Page 10: 04/ Fixture Installation

    04/ Fixture Installation  DO install and operate by qualified operator. Fixture(s) should be installed in areas outside walking paths, seating areas, or away from areas were unauthorized personnel might reach the fixture by hand. NEVER stand directly below the fixture(s) when rigging, removing or servicing.
  • Page 11 Steps for installing the omega brackets to the fixture: - 10 -...

  • Page 12: 05/ Effect Wheels

    05/ Effect Wheels DANGER! Install the rotating gobos with the device switched off only. Unplug from mains before changing the rotating gobos! R-Gobos Part Number ① Gobo1 3011001118 ② Gobo2 3011001117 ③ Gobo3 3011001114 ④ Gobo4 3011001116 ⑤ Gobo5 3011001115 ⑥...

  • Page 13: Replacing Rotating Gobos

    5.1 Replacing Rotating Gobos 1. Unplug the power and signal adapter cables at A and unscrew the four screws at B to take out the component; 2. Unscrew the four screws at C to separate the GOBO component; - 12 -...
  • Page 14 3. Half loosen the six screws at D and remove the belt; Unscrew the screw at E, then take out the rotating gobo wheel component; 4. Press down the gobo from the edge of the rotating gobo wheel component and slowly pull it out;...
  • Page 15 6. Do not touch the surface of the gobo with bare fingers. The gobo has a small position point at its edge which has to aim at the position point on the gobo holder like H shows (glossy side towards the light source). 7.

  • Page 16: 06/ How To Set The Unit

    06/ How To Set The Unit 6.1 Main Functions  To access the control menus, press the [MENU] button.  Navigate the menu structure, using the [ENTER], [ UP] and [ DOWN] buttons.  To select a menu option or to confirm a selection, press the [ENTER] button. ...
  • Page 17 MENU SUBMENU OPTIONS Fast Dimmer Speed Smooth Square Law Inv SQ Law Dimmer Curve Linear S Curve Standard Power Mode Boost Quiet Display Invert Backlight Intensity 1-10 (Default=10) Display Settings °C Temperature Unit °F English Language Chinese Auto Test Fixture Test Manual Test Fixture Use Hour Total LED Hour...
  • Page 18 DMX Settings Enter the control menu and select DMX Settings, press ENTER. Use the UP/DOWN button to select DMX Address, DMX Channel Mode, No DMX Status, Connect Option, Network, Art-Net Settings, sACN Settings, Artnet to DMX or View DMX Value. DMX Address Select DMX Address, press ENTER.
  • Page 19 Connect Option Select Connect Option, press ENTER. Use UP/DOWN button to select Auto, DMX, Art-Net or sACN, confirm your selection with ENTER. To exit the menu, press MENU, or wait 30 seconds. Network Select Network, press ENTER. Use UP/DOWN button to select IP Address or Subnet Mask, confirm your selection with ENTER.
  • Page 20 Fixture Settings Enter the control menu and select Fixture Settings, press ENTER. Use the UP/DOWN button to select Pan Invert, Tilt Invert, P/T Feedback, Dimmer Speed, Dimmer Curve or Power Mode. Pan Invert Select Pan Invert, press ENTER. Use UP/DOWN button to select No (pan invert deactivated) or Yes (pan invert activated), confirm your selection with ENTER.
  • Page 21 Dimmer Curve Select Dimmer Curve, press ENTER. Use UP/DOWN button to select Square Law, Inv SQ Law, Linear or S Curve, confirm your selection with ENTER. To exit the menu, press MENU, or wait 30 seconds. Power Mode Select Power Mode, press ENTER. Use UP/DOWN button to select Standard, Boost or Quiet, confirm your selection with ENTER.
  • Page 22 Temperature Unit Select Temperature Unit, press ENTER. Use UP/DOWN button to select °C or °F, confirm your selection with ENTER. To exit the menu, press MENU, or wait 30 seconds. Language Select Language, press ENTER. Use UP/DOWN button to select English or Chinese, confirm your selection with ENTER.
  • Page 23 Fixture Information Enter the control menu and select Fixture Information, press ENTER. Use the UP/DOWN button to select Fixture Use Hour, LED Use Hour, Temperature, USB Upgrade File, Fan State, Firmware Version, RDM UID or Error Logs. Fixture Use Hour Select Fixture Use Hour, press ENTER.
  • Page 24 Fan State Select Fan State, press ENTER. The fan status is displayed. To exit the menu, press MENU, or wait 30 seconds. Firmware Version Select Firmware Version, press ENTER. The firmware version is displayed. To exit the menu, press MENU, or wait 30 seconds. RDM UID Select RDM UID, press ENTER.
  • Page 25 Reset Function Enter the control menu and select Reset Function, press ENTER. Use the UP/DOWN button to select Pan/Tilt Reset, Effect Reset or All Reset. Pan/Tilt Reset Select Pan/Tilt Reset, press ENTER. Use UP/DOWN button to select No or Yes (the device will run built-in program to reset pan/tilt to their home positions), confirm your selection with ENTER.
  • Page 26 Special Function Enter the control menu and select Special Function, press ENTER. Use the UP/DOWN button to select Factory Restore. Factory Restore Select Factory Restore, press ENTER. If you wish to reset the device to the factory settings, select Yes. If you do not wish to reset anything, select No.
  • Page 27 RDM functions: Certain menus of the device and functions can be called up via the RDM protocol. The parameter IDs are implemented as follows for different commands: Command Command Command Parameter ID ‘Discovery’ ‘Set’ ‘Get’ DISC_UNIQUE_BRANCH √ √ √ DISC_MUTE √...

  • Page 28: Home Position Adjustment

    6.2 Home Position Adjustment  To access the control menus, press the [MENU] button.  To access the offset menus, long-press the [ENTER] button.  Navigate the offset menus, using the [ENTER], [ UP] and [ DOWN] buttons.  To select a menu option or to confirm a selection, press the [ENTER] button. ...
  • Page 29 Dimming Start Select Dimming Start, press ENTER. Use UP/DOWN button to select a value between 0 and 9999, confirm your selection with ENTER. To exit the offset menu, press MENU, or wait 30 seconds. Frequency(Hz) Select Frequency(Hz), press ENTER. Use UP/DOWN button to select a value between 1072 and 1327, confirm your selection with ENTER.
  • Page 30 Dimming Start 4 Select Dimming Start 4, press ENTER. Use UP/DOWN button to select a value between -128 and 127, confirm your selection with ENTER. To exit the offset menu, press MENU, or wait 30 seconds. Select Pan, press ENTER. Use UP/DOWN button to select a value between -128 and 127, confirm your selection with ENTER.
  • Page 31 Yellow Select Yellow, press ENTER. Use UP/DOWN button to select a value between -128 and 127, confirm your selection with ENTER. To exit the offset menu, press MENU, or wait 30 seconds. Select Cto, press ENTER. Use UP/DOWN button to select a value between -128 and 127, confirm your selection with ENTER.
  • Page 32 Gobo 2 Select Gobo 2, press ENTER. Use UP/DOWN button to select a value between -128 and 127, confirm your selection with ENTER. To exit the offset menu, press MENU, or wait 30 seconds. Prism 1 Select Prism 1, press ENTER. Use UP/DOWN button to select a value between -128 and 127, confirm your selection with ENTER.
  • Page 33 Frost Select Frost, press ENTER. Use UP/DOWN button to select a value between -128 and 127, confirm your selection with ENTER. To exit the offset menu, press MENU, or wait 30 seconds. Focus Select Focus, press ENTER. Use UP/DOWN button to select a value between -128 and 127, confirm your selection with ENTER.

  • Page 34: 07/ Control By Universal Dmx Controller

    07/ Control By Universal DMX Controller 7.1 DMX512 Connection 1. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120-ohm 1/4W resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the last unit.

  • Page 35: Address Setting

    7.2 Address Setting If you use a universal DMX controller to control the units, you have to set DMX address between 1 and 512 so that the units can receive DMX signal. Press the MENU button to access the control menus, select DMX Settings, press the ENTER button to confirm.
  • Page 36 24 Channels (Mode 1): CHANNEL VALUE FUNCTION 000-255 0°540° 000-255 PAN FINE TILT 000-255 0°260° 000-255 TILT FINE PAN/TILT SPEED 000-255 Fast to Slow CYAN 000-255 0%100% MAGENTA 000-255 0%100% YELLOW 000-255 0%100% 000-255 0%100% COLOR WHEEL 000-007 Open 008-011 Color 1 012-015 Color 2...
  • Page 37 088-095 Gobo 4 Shaking Slow to Fast 096-103 Gobo 5 Shaking Slow to Fast 104-111 Gobo 6 Shaking Slow to Fast 112-127 Gobo 7 Shaking Slow to Fast 128-189 Clockwise Rotation Fast to Slow 190-193 Stop 194-255 Counter-Clockwise Rotation Slow to Fast GOBO WHEEL 1 ROTATION 000-127 Index 0°360°...
  • Page 38 008-255 PRISM 2 ROTATION 000-127 Index 0°360° 128-189 Clockwise Rotation Fast to Slow 190-193 Stop 194-255 Counter-Clockwise Rotation Slow to Fast FROST 000-255 0%100% STROBE 000-007 Close 008-015 Open 016-131 Strobe from Slow to Fast 132-139 Open 140-181 Fast Open Slow Close 182-189 Open 190-231...
  • Page 39 17 Channels (Mode 2): CHANNEL VALUE FUNCTION 000-255 0°540° 000-255 PAN FINE TILT 000-255 0°260° 000-255 TILT FINE PAN/TILT SPEED 000-255 Fast to Slow CYAN 000-255 0%100% MAGENTA 000-255 0%100% YELLOW 000-255 0%100% 000-255 0%100% COLOR WHEEL 000-007 Open 008-011 Color 1 012-015 Color 2...
  • Page 40 248-255 Open DIMMER 000-255 0%100% 000-255 DIMMER FINE FOCUS 000-255 0%100% 000-255 FOCUS FINE SPECIAL FUNCTION 000-029 Null 030-039 Dimmer Curve Linear 040-049 Dimmer Curve Square Law 050-059 Dimmer Curve Inv Square Law 060-069 Dimmer Curve S 070-079 Power Mode Standard 080-089 Power Mode Boost 090-099...

  • Page 41: 08/ Error Information

    08/ Error Information Error codes are shown continuously in the display when the fixture fails and they will not disappear until the fixture is repaired. CPU- B/C/D/E/F Error Check whether the 485 (DATA) leads on the PCB board are installed in place or disconnected.
  • Page 42 Tilt Reset Error Check whether the position of the tilt where the magnet is installed falls off or is damaged. Check whether there are obstacles in the tilt operating range. Check whether the Hall element on the tilt is damaged. Check whether the lead connecting the Hall element on the tilt and the PCB board is in poor contact or disconnected.
  • Page 43 Magenta Reset Error Check whether the position of the magenta color wheel where the magnet is installed falls off or is damaged. Check whether there are obstacles in the magenta color wheel operating range. Check whether the Hall element on the magenta color wheel is damaged.
  • Page 44 Color Reset Error Check whether the position of the color wheel where the magnet is installed falls off or is damaged. Check whether there are obstacles in the color wheel operating range. Check whether the Hall element on the color wheel is damaged. Check whether the lead connecting the Hall element on the color wheel and the PCB board is in poor contact or disconnected.
  • Page 45 R-Gobo1 Reset Error Check whether the position of the gobo wheel 1 where the magnet is installed falls off or is damaged. Check whether there are obstacles in the gobo wheel 1 operating range. Check whether the Hall element on the gobo wheel 1 is damaged. Check whether the lead connecting the Hall element on the gobo wheel 1 and the PCB board is in poor contact or disconnected.
  • Page 46 R-Prism1/2 Reset Error Check whether the position of the prism 1/2 where the magnet is installed falls off or is damaged. Check whether there are obstacles in the prism 1/2 operating range. Check whether the Hall element on the prism 1/2 is damaged. Check whether the lead connecting the Hall element on the prism 1/2 and the PCB board is in poor contact or disconnected.
  • Page 47 Led Temp. Too High Check if the fan is working properly. Check if the fan speed is normal. Check if the ambient temperature is abnormal. BaseFan1/2 Start Err Check whether the fan is not running. Check whether the fan leads are installed in place or disconnected. Check whether the fan is damaged.
  • Page 48 HeadFan1/2/3/4/5/6/7/8 Too Low Check whether the fan is out of order. Check whether there are obstacles in the fan operating range. HeadFan1/2/3/4/5/6/7/8 Too High Check whether the fan is out of order. Check whether the fan circuit on the motherboard breaks down. ArmFan1 Start Err Check whether the fan is not running.

  • Page 49: 09/ Troubleshooting

    The position of each fan of the fixture: 09/ Troubleshooting Following are a few common problems that may occur during operation. Here are some suggestions for troubleshooting: A. The unit does not work, no light and the fan does not work ...

  • Page 50: 10/ Fixture Cleaning

    10/ Fixture Cleaning It is absolutely essential that the fixture is kept clean to ensure the maximum light-output and allow the fixture to function reliably throughout its life. The fixture must be cleaned regularly to avoid dust, dirt and smoke-fluid residues building up on or within the fixture. The cleaning frequency depends on the application environment.
  • Page 51 Declaration of Conformity We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 2014/30/EU. EN 55032: 2015+A11: 2020; EN IEC 61000-3-2: 2019; EN 61000-3-3: 2013+A1: 2019; EN 55035: 2017+A11: 2020.

This manual is also suitable for:

Lyra

Table of Contents