Technical Specifications - ACME LED‐MS700PE User Manual

4. Take out the fixture.
5. Unlock the lock module take out omega clamps.
Installations:
1. Bolt each clamp (1) to the Omega holder with screw and lock nut through the hole in the
holder.
2. Fasten the omega holders (2) on the bottom of the base by inserting quick-lock fasteners (3)
into the holes of the base and tighten fully clockwise.
3. Hang the fixture to the support (4) through clamp and fasten the screws (5). Fasten the safety
cable (6) through the bottom of the base and over the support.
Fig.1
Attention:
Always ensure that the structure to which you are attaching the unit is secure and is able to
support a weight of 10 times of the unit's weight without any harming deformation.
Make absolute sure that the unit is firmly fixed in way that no vibrating or slipping would
occur during operation.
The equipment must be installed beyond the areas where persons may walk by or be seated.
The rigging has to be operated by or under the guide of the skilled person.

3. Technical Specifications

Very long 30,000 hour life span
DMX Control: 16/17 channels
Motorized focus through DMX control
Operation Modes: DMX, Master/Slave, Sound Active
Built-in programs under Master/Slave triggered by music
Smooth 0-100% dimming and variable strobe speeds
One rotating gobo wheel with seven gobos and white
One fixed gobo wheel with eight gobos and white
Fig.2
4C