Option1 Settings - Panasonic PT-D10000E Operating Instructions Manual

Option1 settings

MENU
This menu can be used to make a variety of
picture and projector settings.
MENU MENU
Press to display the Press to display the
MAIN MENU screen. MAIN MENU screen.
Press to select Press to select
"OPTION1". "OPTION1".
Press to display the Press to display the
"OPTION1" menu. "OPTION1" menu.
MAIN MENU MAIN MENU
PICTURE PICTURE
POSITION POSITION
ADVANCED MENU ADVANCED MENU
DISPLAY LANGUAGE DISPLAY LANGUAGE
OPTION1 OPTION1
OPTION2 OPTION2
TEST PATTERN TEST PATTERN
SIGNAL LIST SIGNAL LIST
NETWORK NETWORK
SECURITY SECURITY
MENU SELECT MENU SELECT
ENTER ENTER SUB MENU SUB MENU
Adjusting colour matching
When multiple sets are used simultaneously, this
projector allows the user to correct the difference of
colours among the sets.
1. Press ▲▼ to select "COLOR
MATCHING".
OPTION1 OPTION1
▲▼◄► COLOR MATCHING COLOR MATCHING
LARGE SCREEN CORRECTION LARGE SCREEN CORRECTION
ENTER
AUTO SIGNAL AUTO SIGNAL
AUTO SETUP AUTO SETUP
BACK COLOR BACK COLOR
DVI EDID DVI EDID
AUX DVI EDID AUX DVI EDID
P IN P P IN P
FUNC1 FUNC1
OSD POSITION OSD POSITION
OSD MEMORY OSD MEMORY
MENU SELECT MENU SELECT
CHANGE CHANGE
DEFAULT
2. Press ◄► to switch "COLOR
MATCHING".
• The setting will change as follows each time
◄► is pressed.
• OFF:
Colour matching adjustment is not carried out.
• COLORS:
It is possible to adjust the 3colours of "R (Red)",
"G (Green)" and "B (Blue)".
• 7COLORS:
It is possible to adjust the 7colours of "R (Red)",
"G (Green)", "B (Blue)", "Cy (Cyan)", "Mg
(Magenta)", "Ye (Yellow)" and "Wh (White)".
• MEASURE:
Refer to "Adjusting the colour matching using
a colorimeter" on the next page for details on
these modes.
OFF OFF
OFF OFF
OFF OFF
BLUE BLUE
EDID2(PC) EDID2(PC)
EDID2(PC) EDID2(PC)
OFF OFF
P IN P P IN P
2 2
ON ON
OFF
MEASURE
3COLORS
7COLORS
67
ENGLISH –