Panasonic PT-D10000E Operating Instructions Manual page 52

Adjusting the picture (continued)
8. Press ◄► to adjust the level.
Item Item Operation Operation
Press ► button. Press ► button.
R R
Press ◄ button. Press ◄ button.
Press ► button. Press ► button.
G G
Press ◄ button. Press ◄ button.
Press ► button. Press ► button.
B B
Press ◄ button. Press ◄ button.
Note
• All colours will not be displayed properly unless
adequate adjustment is made. If the adjustment
does not look suitable, you can press DEFAULT to
return the setting for the selected item only to the
factory default setting.
• The colour temperature cannot be adjusted for the
internal test pattern (p. 83). Be sure to project the
input signal when adjusting the colour temperature.
Gamma setting
This switches the gamma mode.
1. Press ▲▼ to select "GAMMA".
PICTURE PICTURE
PICTURE MODE PICTURE MODE
CONTRAST CONTRAST
BRIGHTNESS BRIGHTNESS
COLOR COLOR
TINT TINT
COLOR TEMP. COLOR TEMP.
GAMMA GAMMA
SHARPNESS SHARPNESS
NOISE REDUCTION NOISE REDUCTION
DYNAMIC IRIS DYNAMIC IRIS
SYSTEM SELECTOR SYSTEM SELECTOR
MENU SELECT MENU SELECT
CHANGE CHANGE
5
– ENGLISH
Adjustment Adjustment
Adjustment Adjustment
range range
Deepens Deepens
red. red.
Maximum Maximum
value value
Weakens Weakens
HIGH : 255 HIGH : 255
red. red.
LOW : 127 LOW : 127
Deepens Deepens
green. green.
Minimum value Minimum value
HIGH : 0 HIGH : 0
Weakens Weakens
LOW : -127 LOW : -127
green. green.
Deepens Deepens
Default Default
blue. blue.
HIGH : 255 HIGH : 255
LOW : 0 LOW : 0
Weakens Weakens
blue. blue.
NATURAL NATURAL
0 0
0 0
10 10
1 1
DEFAULT DEFAULT
DEFAULT DEFAULT
0 0
OFF OFF
OFF OFF
AUTO 1 AUTO 1
2. Press ◄► to switch "GAMMA".
• The setting will change as follows each time
◄► is pressed.
DEFAULT DEFAULT USER1 USER1
2.5 2.5
Note
• Separate software is required to select "USER1"
and "USER2". Consult your dealer.
• "DEFAULT" cannot be selected when the picture
mode has been set to "USER".
Sharpness setting
This adjusts the sharpness of the pictures.
1. Press ▲▼ to select
"SHARPNESS".
PICTURE PICTURE
PICTURE MODE PICTURE MODE
CONTRAST CONTRAST
BRIGHTNESS BRIGHTNESS
COLOR COLOR
TINT TINT
COLOR TEMP. COLOR TEMP.
GAMMA GAMMA
SHARPNESS SHARPNESS
NOISE REDUCTION NOISE REDUCTION
DYNAMIC IRIS DYNAMIC IRIS
SYSTEM SELECTOR SYSTEM SELECTOR
MENU SELECT MENU SELECT
CHANGE CHANGE
3. Press ◄► to adjust the level.
Operation Operation Adjustment Adjustment
Press ► Press ► Contours become Contours become
button. button. sharper. sharper.
Press ◄ Press ◄ Contours become Contours become
button. button. softer. softer.
Note
• The possible setting range will vary depending on
the input signal.
USER2 USER2
2.2 2.2
NATURAL NATURAL
0 0
0 0
10 10
1 1
DEFAULT DEFAULT
DEFAULT DEFAULT
0 0
OFF OFF
OFF OFF
AUTO 1 AUTO 1
Adjustment range Adjustment range
0 to 15 0 to 15