Panasonic PT-D10000E Operating Instructions Manual page 63

4. Press ▲▼ to specify the area to
be adjusted.
• To joint the top: set "UPPER" to "ON".
• To joint the bottom: set "LOWER" to "ON".
To joint the left: set "LEFT" to "ON".
•
To joint the right: set "RIGHT" to "ON".
•
5. Press ENTER to toggle "ON" and
"OFF".
6. Press ◄► to adjust the
compensation width and start
position.
■
To display the adjustment
marker
7. Press ▲▼ to select "MARKER".
EDGE BLENDING EDGE BLENDING
UPPER UPPER START START
OFF OFF WIDTH WIDTH
LOWER LOWER START START
OFF OFF WIDTH WIDTH
LEFT LEFT START START
OFF OFF WIDTH WIDTH
RIGHT RIGHT START START
OFF OFF WIDTH WIDTH
MARKER MARKER
BRIGHT ADJUST BRIGHT ADJUST
MENU SELECT MENU SELECT
CHANGE CHANGE
ENTER ENTER
8. Press ENTER to select "ON".
• A marker for adjusting the picture position
appears. The optimal point is the position where
the red line of one frame overlaps the green line
of the other frame.
The correction widths of the jointed frames
must be the same value all the time. The
optimal joint cannot be achieved if the jointed
frames have different correction widths.
The optimal point is where The optimal point is where
these lines overlap. these lines overlap.
Green line Green line
Red line Red line
0 0
128 128
0 0
128 128
0 0
128 128
0 0
128 128
OFF OFF
9. Press ▲▼ to select "BRIGHT
ADJUST".
EDGE BLENDING EDGE BLENDING
UPPER UPPER START START
OFF OFF WIDTH WIDTH
LOWER LOWER START START
OFF OFF WIDTH WIDTH
LEFT LEFT START START
OFF OFF WIDTH WIDTH
RIGHT RIGHT START START
OFF OFF WIDTH WIDTH
MARKER MARKER
BRIGHT ADJUST BRIGHT ADJUST
MENU SELECT MENU SELECT
SUB MENU SUB MENU
ENTER ENTER
10. Press ENTER.
• The "BRIGHT ADJUST" screen will be
displayed.
BRIGHT ADJUST BRIGHT ADJUST
BRIGHT INSIDE BRIGHT INSIDE
BRIGHT OUTSIDE BRIGHT OUTSIDE
UPPER UPPER
0 0
LOWER LOWER
0 0
LEFT LEFT
0 0
RIGHT RIGHT
0 0
MENU SELECT MENU SELECT
ADJUST ADJUST
11. Press ▲▼ to select "BRIGHT
INSIDE".
1. Press ENTER.
• The "BRIGHT INSIDE" adjustment screen will
be displayed.
BRIGHT INSIDE BRIGHT INSIDE
INTERLOCKED INTERLOCKED
Wh Wh 0 0
R R 0 0
G G 0 0
B B
0 0
MENU SELECT MENU SELECT
CHANGE CHANGE
• When "INTERLOCKED" is set to "OFF",
individual adjustment of "R", "G" and "B" will be
possible.
1. Press ▲▼ to select an item, and
press ◄► to adjust the setting.
• Once adjustment is complete, press MENU to
return to "BRIGHT ADJUST".
14. Press ▲▼ to select the part of
"UPPER", "LOWER", "RIGHT",
"LEFT".
0 0
128 128
0 0
128 128
0 0
128 128
0 0
128 128
OFF OFF
ON ON
ENGLISH –
6