Panasonic PT-D10000E Operating Instructions Manual page 71

Back Colour
This sets the colour for the projection screen when no
signals are being input.
1. Press ▲▼ to select "BACK
COLOR".
OPTION1 OPTION1
COLOR MATCHING COLOR MATCHING
LARGE SCREEN CORRECTION LARGE SCREEN CORRECTION
AUTO SIGNAL AUTO SIGNAL
AUTO SETUP AUTO SETUP
BACK COLOR BACK COLOR
DVI EDID DVI EDID
EDID2(PC) EDID2(PC)
AUX DVI EDID AUX DVI EDID EDID2(PC) EDID2(PC)
P IN P P IN P
FUNC1 FUNC1
OSD POSITION OSD POSITION
OSD MEMORY OSD MEMORY
MENU SELECT MENU SELECT
CHANGE CHANGE
2. Press ◄► to switch "BACK
COLOR".
• The setting will change as follows each time
◄► is pressed.
BLACK BLUE
LOGO3
• BLACK:
The entire projection area will appear black.
• BLUE:
The entire projection area will appear blue.
• LOGO1:
The picture registered by the user will be
projected in the projection area.
• LOGO:
The picture registered by the user will be
projected in the projection area.
• LOGO:
The Panasonic logo is projected.
Note
• Separate software is required in order to create the
pictures to use for "LOGO1" and "LOGO2". Consult
your dealer.
OFF OFF
OFF OFF
OFF OFF
BLUE BLUE
OFF OFF
P IN P P IN P
2 2
ON ON
LOGO1
LOGO2
DVI EDID
Select the EDID mode setting that corresponds to the
device to be connected.
1. Press ▲▼ to select "DVI EDID".
OPTION1 OPTION1
COLOR MATCHING COLOR MATCHING
LARGE SCREEN CORRECTION LARGE SCREEN CORRECTION
AUTO SIGNAL AUTO SIGNAL
AUTO SETUP AUTO SETUP
BACK COLOR BACK COLOR
DVI EDID DVI EDID EDID2(PC) EDID2(PC)
AUX DVI EDID AUX DVI EDID EDID2(PC) EDID2(PC)
P IN P P IN P
FUNC1 FUNC1
OSD POSITION OSD POSITION
OSD MEMORY OSD MEMORY
MENU SELECT MENU SELECT
CHANGE CHANGE
2. Press ◄► to switch "DVI EDID".
• The setting will change as follows each time
◄► is pressed.
EDID1
• EDID1 (Input signal formats supported) :
480p, 576p, 720/60p, 720/59.94p, 720/50p,
1 080/60i, 1 080/59.94i, 1 080/50i, 1 080/24sF,
1 080/23.98sF, 1 080/30p, 1 080/29.97p,
1 080/25p, 1 080/24p, 1 080/23.98p, 1 080/50p,
1 080/59.94p, 1 080/60p
• EDID (Input signal formats supported) :
Displayable resolution:
VGA-UXGA (non-interlace)
Dot clock frequency: 25 MHz - 162 MHz
Note
• Interlace signals are not supported even when the
EDID2 (PC) mode is selected.
OFF OFF
OFF OFF
OFF OFF
BLUE BLUE
OFF OFF
P IN P P IN P
2 2
ON ON
EDID2 (PC)
ENGLISH –
71