Ping Test Page - Panasonic PT-D10000E Operating Instructions Manual

How to use network function (continued)
■
Authentication server setting page
The POP server is set on this page when POP authentication is required for mail transmissions.
Click [Network set up], then [Authentication set up] to display the POP server setup page.
■

Ping test page

This page makes it possible to check whether the network is connected to the E-mail server, POP server, DNS
server, etc.
Click [Network set up], then [Ping test] to display the Ping test page.
94
– ENGLISH
Select the authentication method Select the authentication method
specified by your Internet service specified by your Internet service
provider. provider.
Set this if SMTP authentication has Set this if SMTP authentication has
been selected. been selected.
POP server name field POP server name field
Available input characters: Available input characters:
Alphanumeric characters (A–Z, a–z, Alphanumeric characters (A–Z, a–z,
0–9), hyphen (-), period (.) 0–9), hyphen (-), period (.)
POP server user name field POP server user name field
POP server password field POP server password field
Enter the port number for the Enter the port number for the
SMTP server (normally "5"). SMTP server (normally "5").
Enter the port number for the Enter the port number for the
POP server (normally "110"). POP server (normally "110").
Button to update settings Button to update settings
Enter the IP address of the server Enter the IP address of the server
to be tested. to be tested.
Button for conducting the test. Button for conducting the test.
Display which appears when the Display which appears when the
connection was successful. connection was successful.
Display which appears when the Display which appears when the
connection failed. connection failed.