Panasonic PT-D10000E Operating Instructions Manual page 38

How to adjust the lens (continued)
Adjustment range after lens position (optical shift)
Do not move the lens beyond the bounds of the shift range as this may cause a change in the focus. This limitation
is to protect the parts of the projector.
Using the standard projection position as the reference, the optical axis shift function makes it possible to adjust the
projection position in the ranges shown in the figures below.
Model number of Model number of
projection lens projection lens
ET-D75LE6 ET-D75LE6
Zoom Zoom
Lens Lens
ET-D75LE1 ET-D75LE1
ET-D75LE2 ET-D75LE2
ET-D75LE3 ET-D75LE3
ET-D75LE4 ET-D75LE4
ET-D75LE8 ET-D75LE8
Note
• The ET-D75LE5 has a fixed focal point, and so shift adjustment cannot be carried out.
Moving the projection lens position to the home position
1. Press and hold LENS on the projector's controls or SHIFT on the remote
control for  seconds or more.
LENS LENS
SHIFT SHIFT
EXECUTE EXECUTE
ENTER ENTER
CANCEL CANCEL
MENU MENU
. Press ENTER while the menu shown above is being displayed. (It will be
displayed for about 5 seconds.)
• "PROGRESS..." will appear in the menu, and the projection lens will move to the home position.
Note
• The home position for the projection lens is the lens position when the lens is being replaced or when the
projector is being stored away, and it is not the optical centre of the screen.
8
– ENGLISH
PT-D10000E PT-D10000E
Standard projection Standard projection
position position
0.2H 0.2H 0.2H 0.2H
Projected screen Projected screen
width, H width, H
Standard projection Standard projection
position position
0.3H 0.3H 0.3H 0.3H
Projected screen Projected screen
width, H width, H
PT-DW10000E PT-DW10000E
Standard projection Standard projection
position position
0.15H 0.15H 0.15H 0.15H
Projected screen Projected screen
width, H width, H
Standard projection Standard projection
position position
0.2H 0.2H 0.2H 0.2H
Projected screen Projected screen
width, H width, H