Panasonic PT-D10000E Operating Instructions Manual page 65

Note
• When "FRAME DELAY" is set to "SHORT",
deterioration in the picture quality will occur.
Furthermore, the noise reduction function cannot be
used.
Raster position
When the whole area where the input picture can be
displayed is not used, the picture can be moved to
any position inside the display area.
1. Press ▲▼ to select "RASTER
POSITION".
ADVANCED MENU ADVANCED MENU
DIGITAL CINEMA REALITY DIGITAL CINEMA REALITY
BLANKING BLANKING
INPUT RESOLUTION INPUT RESOLUTION
CLAMP POSITION CLAMP POSITION
EDGE BLENDING EDGE BLENDING
FRAME DELAY FRAME DELAY
RASTER POSITION RASTER POSITION
MENU SELECT MENU SELECT
SUB MENU SUB MENU
ENTER ENTER
. Press ENTER.
• The "RASTER POSITION" screen will be
displayed.
RASTER POSITION RASTER POSITION
V V
H H
ADJUST ADJUST
3. Press ▲▼◄► to adjust the
position.
■
PT-D10000E
When 5:4 pictures are displayed When 5:4 pictures are displayed
(when SXGA signals are input) (when SXGA signals are input)
Pressing ► button will move Pressing ► button will move
the image to the right. the image to the right.
Pressing ◄ button will move Pressing ◄ button will move
the image to the left. the image to the left.
AUTO AUTO
OFF OFF
DEFAULT DEFAULT
0 0
0 0
When 16:9 pictures are displayed When 16:9 pictures are displayed
(when HDTV or 480p pictures are input or (when HDTV or 480p pictures are input or
16:9 is selected in the SIZE mode) 16:9 is selected in the SIZE mode)
Pressing ▲ button will move Pressing ▲ button will move
the image upward. the image upward.
Pressing ▼ button will move Pressing ▼ button will move
the image downward. the image downward.
■
PT-DW10000E
When 4: pictures are displayed When 4: pictures are displayed
Pressing ► button will move Pressing ► button will move
the image to the right. the image to the right.
Pressing ◄ button will move Pressing ◄ button will move
the image to the left. the image to the left.
4. Press MENU three times.
• The on-screen indications disappear and the
normal screen appears again.
65
ENGLISH –