Panasonic PT-D10000E Operating Instructions Manual page 30

Installation of input module (optional) (continued)
Connecting the signal to the SD-SDI input module
Note
• Insert the input module suitable for the input signal specifications.
• Normally, use SYSTEM SELECTOR in "AUTO".
• If a source with an unstable signal is connected, errors in automatic signal recognition may occur. If this happens,
use the SYSTEM SELECTOR menu to switch the format to the one which matches the signals being input.
• If using an input module which supports two different signal specifications, use the SYSTEM SELECTOR menu
to toggle between the two different types of signal. When this is done, the input signal details will appear on the
screen momentarily and then disappear automatically.
*1: The LAN terminal of the input module (optional) cannot be used with the PT-D10000E/PT-DW10000E. Use the
LAN terminal that is provided as standard with the projector.
0
– ENGLISH
SD-SDI input module (optional) SD-SDI input module (optional)
ET-MD77SD1 (for 480i/576i) ET-MD77SD1 (for 480i/576i)
SD-SDI Module SD-SDI Module
IN IN
ET-MD77SD1 ET-MD77SD1 SERIAL SERIAL
SD-SDI signal SD-SDI signal SD-SDI signal output SD-SDI signal output
(active through) (active through)
Business digital Business digital
VCR VCR
AUTO AUTO
OUT OUT
LAN LAN
LAN terminal LAN terminal *1 *1
(10BASE-T/100BASE-TX) (10BASE-T/100BASE-TX)
480i 480i 576i 576i