Dimensions - Panasonic PT-D10000E Operating Instructions Manual

Dlp based projector commercial use
Hide thumbs Also See for PT-D10000E:
Table of Contents

Advertisement

Dimensions

Outside dimensions
unit : mm
unit : mm
Installation dimensions diagram
(Figure 1 : Dimensions applying when one unit is used)
(Figure 1 : Dimensions applying when one unit is used)
Attention
Leave a clearance of at least 50 cm so that the ventilation opening on the rear panel will not be blocked.
Set up the projector so that air can flow freely around the rear of the projector without staying still. In addition,
leave a space of 30 cm or more at the sides so that the hot air coming out from the air outlet vents does not get
drawn in through the air intake vents.
When the projector is to be placed inside a box and used, leave the clearances shown in Fig. 2 and ensure that
the temperature during operation remains within the 0 °C to 35 °C range.
10
– ENGLISH
OFF
OFF
ON
ON
AC IN
AC IN
MAIN POWER
MAIN POWER
50 cm or
50 cm or
Exhaust
Exhaust
more
more
(Figure 2 : Dimensions applying when two units are used)
(Figure 2 : Dimensions applying when two units are used)
50 cm or
50 cm or
more
more
Exhaust
Exhaust
50 cm or
50 cm or
more
more
Exhaust
Exhaust
OPEN
OPEN
FILTER
FILTER
CLEANING
CLEANING
CLOSE
CLOSE
578
578
50 cm or
50 cm or
more
more
10 cm or more
10 cm or more

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-dw10000ePt-dw1000e

Table of Contents